TS-ENC730
Rugged Metal Enclosure w/ Extra Functions

This rugged metal enclosure is made to house Technologic Systems Single Board Computers in the most hostiles environments, protecting the internal electronics and increasing the general system reliability. In additional, it makes board utilization easier by bringing out a regulated power supply and computer's I/O interfaces through standard connectors.

Hardware Description

The TS-ENC730 metal enclosure is made to house the TS-7300 Single Board Computer and up to two PC/104 peripheral boards. The internal power regulator efficiently converts unregulated 7-28 VDC input into regulated +5 VDC required by the SBC. Sleep mode allows current drain of 200 microAmps with programmable sleep period.

The TS-ENC730 brings out some features implemented on the TS-7300 FPGA, such as the SJA1000 CAN core, PWM for the DAC lines, 800x600 VGA Video, second ethernet port, additional serial ports, etc.

Furthermore, the TS-ENC730 includes the TS-732 daughter board for the TS-7300 onboard FPGA. The AVR microcontroller on the TS-732 implemets ADC/GPIO/LEDs extra functionalities. Also, the physical layer for the CAN bus is provided by the TS-732.

Additional features include:

• User programmable low power sleep mode (300 uA)
• Terminal strip with 8 I/O
  • 4 channel 10 bit ADC 0V - 5V (12-16 bits effective*)
  • 2 channel 12 bit high power DAC 0V - 10V (sync/source 300mA)
• 4 high current GPIO pins (sync/source 400 mA)
• 5-8 COM ports
• Optional CAN bus port with Linux driver available
• Linux Application available for ADC/DAC/GPIO/LEDs control

For further information on this product, please contact Technologic Systems or refer to the manual.

This rugged metal enclosure is made to house Technologic Systems Single Board Computers in the most hostiles environments, protecting the internal electronics and increasing the general system reliability. In additional, it makes board utilization easier by bringing out a regulated power supply and computer's I/O interfaces through standard connectors.

Software Description

Besides the complete software solution that comes along with the TS-7300 internal engine, Technologic Systems provides specific drivers and applications for the TS-ENC730. A Linux user-space application that handles the PIN1 to PIN8 functions on the strip terminal connector is available. This program talks to the AVR Microcontroller via an UART interface and can be used for AVR configuration as well as ADC, DAC and LEDs functionality. Also, a Linux Driver for our CAN core (Lincan Driver) is provided, which is a SJA1000. Please, refer to the TS-CAN1 manual for further information on how to use the Lincan Driver with the TS-T32/TS-ENC730.

For further information on this product, please contact Technologic Systems or refer to the manual.

Technologic Systems provides complete documentation for our mature products, including manuals, schematics, mechanical drawings, etc. The most recent documentation files are always made available through our website. If you are not finding the documentation you are looking for, contact support for more information.

Documentation

• TS-ENC730 Manual
• TS-ENC730 TS-732 Schematic

Articles

• Hardware Reliability
• TS-7250 HALT Report

All Technologic Systems products come with:

Please configure your product using the table below and then add it to your cart. If you have any questions, please contact us for assistance.

Part #	Description	Price (Qty1)	Qty
Product Configuration
TS-ENC730	Metal Enclosure with power converter included	$150
On-board Options
OP-730CAN	CAN Bus Interface	$10
Power Supply
PS-18VDC-REG	International regulated 18VDC wall mounted power supply	$22