Home >
Products >
New Products
|
|
New Products
Cutting Edge Designs for the
Best Embedded Solutions
|
|
| |
Technologic Systems values innovative hardware and integrated software engineering. We are committed to bringing our customers the products they need to get the job done. We understand that requirements are always changing as technology changes, which is why we are always working on new and better embedded solutions. We are constantly expanding our product line and we offer custom solutions for customers with unique requirements.
We release our new products according to the needs of our customers and following the embedded market trends, allowing our customers to make the most of their embedded products. Our engineers are enthusiastic about new projects and we take pride in new designs that are on the cutting edge of the embedded marketplace.
| |
| |
 |
|
|
- 250MHz ARM9 CPU
- 64 MB DDR-RAM
- 4 MB NOR Flash
- Customizable 5K LUT OpenCore FPGA
- 1 micro SDHC Card slot
|
- USB2 480Mbit/s Host(2) / Slave(1)
- 1 10/100 Ethernet
- Small size (67mm x 75mm)
- Boots Linux 2.6 in less than 3 seconds
|
|
|
|
|
 |
|
|
 |
|
|
|
- 250MHz ARM9 CPU
- 64 MB DDR-RAM
- 256 MB XNAND Drive
- 1 MicroSD Card Slot
- Customizable 5K LUT OpenCore FPGA
|
- 4 USB Host Ports, 480Mbit/s
- 1 USB Device Port, 480Mbit/s
- 1 10/100 Ethernet, Optional WiFi
|
|
|
|
|
|
|
|
|
|
|
|
- 250MHz ARM9 CPU
- 64MB DDR-RAM
- 256 MB XNAND Drive
- 1 MicroSD Card Slot
- Customizable 5K LUT OpenCore FPGA
|
- 1 External USB Host Port, 480Mbit/s
- 1 External USB Device Port, 480Mbit/s
- 1 Interal USB Host Port, 480Mbit/s
- 1 10/100 Ethernet, Optional PoE
- Uses 5-12VDC or USB for Power In
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
- 200MHz ARM9 CPU
- 64MB SDRAM (128MB opt)
- 5K LUT FPGA
- Flexible 64-pin FPGA-PC/104 connector
- Able to drive TFT-LCDs via custom FPGA
|
- 8MB RAM Framebuffer, no video core
- DUAL 10/100 ethernet ports
- 1 SD Card slot (up to 6MB/s DMA)
- 5-28VDC Power Input
- Boots Linux 2.6 in about 1 second
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
- 16 channels 16-bit ADC
- ADC Sampling rate up to 2x100ksps
- 512x16bit RAM-FIFO for ADC data
- 4 digital inputs - 0 to 5V
- 1 digital output - 0 to 3.3V/50mA
|
- 4 12-bit DAC channels
- 4 16-bit counters
- Jumper selectable I/O an IRQ
- Linux drivers available
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
- Powered by TS-7395 engine
- 7-inch Color LCD w/ Aluminum Frame
- 200MHz ARM9 CPU w/ 64MB SDRAM
- 5K LUT FPGA
- Touch-Screen and Audio Speaker
|
- 800x480 TFT-LCD core w/ video out
- 8MB Dedicated Framebuffer video core
- 1 SD Card slot (up to 6MB/s DMA)
- Boots Linux 2.6 in about 1 second
- Unbrickable, boots from SD or NAND
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
- Enclosure for TS-7500, TS-7550
- Provides RS-232 console
- Power Over Ethernet
- 3 Relays (277V AC/30VDC at 5A)
- RS-485 port
|
- 8 Buffered Inputs
- 3 Buffered Outputs
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
- 396MHz ARM9 CPU
- 64MB DDR-RAM (128MB Optional)
- 256MB XNAND Drive
- 1 MicroSD Card Slot
- 1.2K LUT Programmable FPGA
|
- 2 USB Host, 1 USB Device Ports
- 10/100 Ethernet Port (Magnetics Req.)
- Up to 6 UARTs (1 Auto-485 capable)
- Up to 78 GPIO/DIO
- 1 SPI, 1 I2C, 1 I2S, 4 ADC
|
|
|
|
|
|
|
|
|
|
|
|
- 250MHz ARM9 CPU
- 64 MB DDR-RAM
- 256 MB XNAND Drive
- 1 MicroSD Card Slot
- Customizable 5K LUT OpenCore FPGA
|
- 2 USB Host, 1 USB Device Ports
- 10/100 Ethernet Port (Magnetics Req.)
- 3 UARTS with CAN Bus, or 8 UARTS
- 53 DIO with I2C, SPI, UARTs, Auto-485
- DMX Support
|
|
|
|
|
|
|
|
|
|
|
|
|
|
