Technologic Systems products use two types of PC104 connectors- the standard PC/104 connector and the PC/104 stack-thru connector. The standard connector is for any SBC used by itself or at the bottom of a PC/104 stack. The standard connector is provided on all of our PC/104 SBCs by default. The optional stack-thru connector is for clients who wish to use a Technologic Systems SBC in conjunction with their PC/104 motherboard. In this case, the Technologic Systems SBC will be mounted above the client board and will require a PC/104 stack-thru connector. PC/104 peripherals (daughter-boards) always have a stack-thru connector, because they must be mounted above the PC/104 SBC. Below you will find pictures of the two PC/104 connectors and an example of a PC/104 stack.
The PC/104 connector consists of two parts, the 64 pin connector and the 40 pin connector. Many PC/104 peripherals only utilize the 64 pin connector. If none of the peripherals you plan to use have a 40 pin connector, your SBC does not need the 40 pin connector.
The TS-7200 series SBCs come with the 64 pin connector. The 40 pin connector is optional.
The TS-7300 comes with the 64 pin connector. It does not support the 40 pin connector.
The TS-7400 does not have a PC/104 connector and cannot be used with PC/104 peripherals.
The TS-7800 comes with both the 64 pin connector and the 40 pin connector by default.
TS-7260 with Standard 8-bit 64-pin PC/104 Connector
TS-7260 with 8-bit 64-pin PC/104 Stack-thru Connector
PC/104 Stack with TS-7260 shown in middle of stack
