Practical Guide to Getting Started With the TS-7553-V2

 

This practical guide gives us an opportunity to take a relaxed approach to getting started with the TS-7553-V2 single board computer. We’re going to take a look at how to make our first connections, and setup the network. These are usually the first things we do before starting development. In the grand scheme of things, this is just a friendlier extrapolation from the official TS-7553-V2 manual, so be sure to keep it handy for more advanced topics and specific details. The only assumption being made is that you’ve purchased the TS-7553-V2 with a development kit, including the pre-programmed microSD card and enclosure with 128×64 px LCD and 4 button keypad. Right then, let’s get started!

Continue reading “Practical Guide to Getting Started With the TS-7553-V2”

Example C Code for Reading ADC Inputs on i.MX28 Based Embedded Systems

Let’s take a quick look at what it takes to read from the ADC inputs of a i.MX28 based embedded system using example C code provided by Technologic Systems. Now, while this can be generically applied to many i.MX28 based embedded systems, we’ll be working with a TS-7680. Right, let’s get started!

Continue reading “Example C Code for Reading ADC Inputs on i.MX28 Based Embedded Systems”

Practical Guide to Getting Started with the TS-7600

This practical guide gives us an opportunity to take a relaxed approach to getting started with the TS-7600 single board computer paired with the TS-ENC750 enclosure with TS-752 baseboard. We’re going to take a look at how to make our first connections, talk about the Linux environment, and setup the network. These are usually the first things we do before starting development. In the grand scheme of things, this is just a friendlier extrapolation from the official TS-7600 manual, so be sure to keep it handy for more advanced topics and specific details. The only assumption being made is that you’ve purchased the TS-7600 with a development kit, including the pre-programmed microSD card and TS-ENC750 and TS-752 baseboard. Right then, let’s get started!

Continue reading “Practical Guide to Getting Started with the TS-7600”

Getting Started with Node.js on an Embedded Single Board Computer Running Linux

The purpose of this guide is to assist in installing node.js on a Single Board Computer running Linux, and creating a simple, lightweight web server application which serves up a “Hello, world!” page.  Once it is complete you can add further functionality to extend it on your own.

Continue reading “Getting Started with Node.js on an Embedded Single Board Computer Running Linux”

Practical Guide to Getting Started with the TS-TPC-7990

Introduction

The goal of this practical guide is to get you through the basic steps of getting your TS-TPC-7990 up and running so you can begin development. It’s mostly an extrapolation of the official TS-TPC-7900 Manual, but provides a more practical and casual approach in setting up connection, networking, and general development environment.

Continue reading “Practical Guide to Getting Started with the TS-TPC-7990”

Practical Guide to Getting Started with the TS-7400-V2

Introduction

This guide aims to get you through the basic steps of getting your TS-7400-V2 up and running so you can begin development. It’s mostly an extrapolation of the official TS-7400-V2 Manual, but provides a more practical and casual approach in setting up connections, networking, and general environment.

Continue reading “Practical Guide to Getting Started with the TS-7400-V2”

How To Compile the Mainline Linux Kernel v4.9 for TS-4900

embedded-linux-ts-board

Here’s a quick how-to guide straight from one of our engineers on how to compile the mainline Linux Kernel v4.9-rc1 and install it on the TS-4900. Support for the TS-4900 in the mainline kernel image (v4.9 and up) is a pretty big deal for us, and we’re excited about it. A big shout out to our friends at Savoir-faire Linux for their hard work in making this happen!

Step 1: Install the Toolchain

We need to install the toolchain from Ubuntu or Debian Jessie by running the following command:

Continue reading “How To Compile the Mainline Linux Kernel v4.9 for TS-4900”

Introduction to PC/104 Connectors

Technologic Systems products use two types of PC104 connectors:  1.) the standard PC/104 connector and 2.) the PC/104 stack-thru connector. The standard connector is for any SBC used by itself or at the bottom of a PC/104 stack. The standard connector is provided on all of our PC/104 SBCs by default. The optional stack-thru connector is for clients who wish to use a Technologic Systems SBC in conjunction with their PC/104 motherboard. In this case, the Technologic Systems SBC will be mounted above the client board and will require a PC/104 stack-thru connector. PC/104 peripherals (daughter-boards) always have a stack-thru connector, because they must be mounted above the PC/104 SBC. Below you will find pictures of the two PC/104 connectors and an example of a PC/104 stack.

Continue reading “Introduction to PC/104 Connectors”

Practical Guide to Getting Started with the TS-7680

ts-7680-hooked-up

Introduction

This guide will walk you through the basic steps of getting your TS-7680 up and running. It’s mostly an extrapolation from the official TS-7680 Manual, but provides a more practical and casual approach in setting up common connections, networking, and environments to begin development.

Continue reading “Practical Guide to Getting Started with the TS-7680”

Practical Guide to Getting Started with the TS-7970

ts-7970-connected

Introduction

This guide will walk you through the basic steps of getting your TS-7970 up and running. It’s mostly an extrapolation from the official TS-7970 Manual, but provides a more practical and casual approach in setting up common connections, networking, and environments to begin development.

Continue reading “Practical Guide to Getting Started with the TS-7970”