16525 East Laser Drive
Fountain Hills, AZ 85268
Phone (480) 837-5200
Technologic Systems' Logo

Home > Products > Accessories & Others > TS-3Z-DIO

TS-3Z-DIO Details

arrow
TS-3Z-DIO Image
TS-3Z-DIO Image
TS-3Z-DIO Image
TS-3Z-DIO Image
TS-3Z-DIO Image
TS-3Z-DIO Image
TS-3Z-DIO Image

The TS-3Z-DIO is an I/O daughter card for the TS-7250-V2. TS-3Z-DIO Schematic.

  • -40 to +85 degrees Celsius operation
  • Size is same as TS-7250-V2 (3.8 x 4.5 inches)
  • 2 position screw terminal connector for power input (8-28 VDC)
  • 40 positions of a 3.5 mm pitch screw terminal connector for IO
  • Screw Terminal connector organized as 2 rows of 20 positions
  • Output screw terminal connectors are located on same end as ethernet ports
  • Input screw terminal connectors are located on opposite end as ethernet ports
  • Two groups of 8 (16 total) Galvanically isolated Inputs
  • Inputs tolerate 0-30V DC or AC
  • Input threshold = 6V typical (referenced to Common)
  • Two groups of 8 (16 total) Galvanically isolated Outputs
  • Outputs are open Drain FET switches to common
  • Outputs can switch up to 30VDC
  • Outputs can switch up to 2 Amps DC current
  • One group of 4 Galvanically isolated Analog Inputs
  • Analog input range is 0 to 10V (adjustable via resistor change)
  • Sampling rate is 10 samples per second with 12-bit resolution
  • Analog group has a 6 position connector with two commons (on opposite end of power connector)
  • One analog input non-isolated for measuring "battery input" (nominal 12V power)
  • 0 to 30 VDC input range, 12-bit resolution, 10 samples per second (located on the TS-7250-V2) - Each group of 8 DIO and the group of 4 analog are all isolated from each other
  • Signals within a group are not isolated from each other
  • Each group of 8 has two common (10 positions per group of 8)
  • Green LED indicator for each Input
  • Red LED indicator for each Output

Contact us!

Search the KB