![]() ![]() ![]() ![]() ![]() ![]() |
![]() ![]() |
|
16525 East Laser Drive Fountain Hills, AZ 85268 Phone (480) 837-5200 |
The TS-7400-V2 is a compact, low power, and cost competitive SBC. The TS-7400-V2 serves as a platform upgrade path for the TS-7400 that provides footprint drop-in and high application code portability that is less expensive, faster, and provides more features than the original. It is powered by the NXP i.MX286 ARM926EJ-S core that is clocked at 454 MHz. The TS-7400-V2 includes a micro-SD socket and brings out many interfaces via a 40 pin header including CAN, ADC, GPIO, SPI, I2C, I2S, and UARTs. Consuming as little as 0.6W, and costing only $84 it's a great balance of features, cost, and power consumption.
The TS-7400-V2 is a small SBC that is designed to provide extreme performance for applications which demand high reliability, fast bootup/startup, and connectivity at low cost and low power, such as point-of-sales (PoS), vending machines, data acquisition units, data recorder modules, etc. Additional TS-7400-V2 specifications include:
The TS-7400-V2 ships with Linux kernel version 2.6.35 and Debian Wheezy preinstalled (Kernel Upgade to v3.14.28 Also Available). Other software features include:
CPU | |
---|---|
CPU Arch | ARM |
CPU Vendor | NXP |
CPU Part Number | i.MX286 |
CPU Speed | 454 MHz |
RAM | |
RAM | 128 MB to 256 MB |
Onboard Storage | |
eMMC Flash Storage | 2 GB (SLC) |
External Storage | |
microSD Socket | 1x |
Data Acquisition & Control | |
Digital Input/Output | 39x |
Analog-to-Digital | 4x |
Interfaces | |
10/100 Ethernet | 1x |
USB Host | 2x |
Serial/COM Port | 4x (2x RS-232, 2x TTL) |
SPI Bus | 1x |
I2C Bus | 1x |
CAN Bus | 1x |
HMI | |
I2S Audio | 1x |
Onboard Devices | |
Battery-Backed Real Time Clock | 1x |
Watchdog Timer | 1x |
Temperature Sensor | 1x |
Operation Temperature | |
Fanless Temp Range | -40 °C to 85 °C |
Power Consumption | |
Min Power Consumption | 0.60 W (< 10 mW Low Power Sleep Mode) |
Max Power Consumption | 2.00 W |
Typical Power Consumption | 1.20 W |
Operating Supply Voltage | |
Operating Supply Voltage | 5 VDC to 28 VDC |
Solutions | |
Linux Kernel | v2.6.35 (Kernel Upgade to v3.14.28 Also Available) |
Debian Linux Distribution | Yes |
Busybox Small Distribution | Yes |
Mechanical | |
Height | 20mm |
Length | 74mm |
Width | 119mm |
Technologic Systems provides complete documentation for our mature products, including manuals, schematics, mechanical drawings, etc. The most recent documentation files are always made available through our website. If you don't find the documentation you are looking for, contact support for more information. Also, please make sure to visit our Embedded Systems Support webpage, our official WIKI and join our official Developers Forum.
For TS-7400-V2 updates and notices Subscribe to the Product Communication System (TS-PCS)
Products based on the same CPU and software platform
Unlike other TS-7000 ARM products, the TS-7400 or TS-7400-V2 are not stand-alone Single Board Computers. The TS-9441 peripheral board is needed during development in order to configure and setup the TS-7400 or TS-7400-V2 flash system. The TS-9441 is equipped with 2KB EEPROM and 2MB serial Flash useful for recovery when an original TS-7400 becomes "bricked" during development (feature not necessary for the TS-7400-V2). Using a console on the TS-7400 or TS-7400-V2 is only possible through the TS-9441 RS232 serial port, named Console Header. Also, the TS-9441 enables regulated 5VDC power in. Once the TS-7400 or TS-7400-V2 is configured and loaded, it can safely run stand-alone. You can purchase the TS-9441-RC-DB9 on the Accessories order page, or by clicking here.
The TS-ENC740 utilizes a very inexpensive off-the-shelf extruded aluminum case from Hammond Manufacturing and adds custom end-plates to match the TS-7400 connector layout. To see details on the Hammond enclosure (part# 1455K1201), visit www.digikey.com or www.hammondmfg.com.
The prices below are available for sales orders requesting different quantities on a per release basis.
Quantity | ||||||||
---|---|---|---|---|---|---|---|---|
Product Configuration | 1 |
10 | 25 | 50 | 100 | 250+ | ||
TS-7400-V2-128-2048F-I | $117 | $97 | $92 | $88 | $84 | Call us | ||
TS-7400-V2-128-2048F-RTC-I | $124 | $104 | $99 | $95 | $91 | Call us | ||
TS-7400-V2-256-2048F-I-DEV | $158 | $138 | $132 | $126 | $120 | Call us | ||
TS-7400-V2-256-2048F-RTC-I | $145 | $125 | $120 | $114 | $109 | Call us |
Technologic Systems can provide you with a custom tailored version of our standard product starting at minimum order sizes of 100 units or more. Customized products can be based on various combinations of many of the standard product features. There will be a one-time customization fee to cover the set up of your custom part number and production processes. Once the set up is complete the standard lead time for your customized product would be 6-8 weeks. Please contact us to get started on tailoring this product to meet your needs. In addition to tailoring our standard product to your needs, for slightly larger orders sizes, Technologic Systems can also provide a custom design based on this product to meet your mechanical requirements or to add features.
Use the table below to configure your product and add it to your cart. If you have any questions, please contact us for assistance.
|