ts-can1

TS-CAN1

CAN Bus PC/104 Peripheral

Lifecycle: Fully Developed | Released: October 2005 | RoHS Compliant Badge RoHS Compliant

The TS-CAN1 is a PC/104 daughter board which provides one single channel CAN interface and enables a PC/104 embedded system to be connected to CAN1.1 and CAN2.0b networks.

  • Opto-isolated CAN interface (optional non-isolation)
  • Up to 1Mbps bit rate
  • Jumper selectable termination resistor, IRQ, and I/O decode
  • Extended temperature range (-40 °C to 85 °C)
  • Supports CanOPEN protocol
$75 (Qty. 1)
No minimum order quantity on standard products.

The TS-CAN1 is a PC/104 daughter board which provides one single channel CAN interface and enables a PC/104 embedded system to be connected to CAN1.1 and CAN2.0b networks.

The TS-CAN1 uses a Philips SJA1000 CAN controller which is opto-isolated from the physical CAN network, increasing the system security. It is also available without opto-isolation, in case of CAN devices that use long wire connections and to minimize propagation delay.

On-board jumpers are used to select both the interrupt and the I/O region used. Up to four boards can be installed in any single system. The SJA1000 controller can be configured to communicate with the processor through 8 different 32-bytes I/O regions.

TS-CAN1 is compatible with both X86 and ARM architectures; therefore, it can be used with the Technologic Systems X86 and ARM based embedded boards. The TS-CAN1 manual is available in the download section.

The TS-CAN1 uses the Ocera framework as the primary software package. Ocera provides the Lincan driver for Linux and a whole set of development libraries, like Libvca, and testing tools, allowing easy and fast development integration. Furthermore, Ocera/Lincan supports the CANOpen high-level protocol. The Lincan driver supports both BasiCAN and PeliCAN, enabling 11-bit and 29-bit identifiers, respectively. The Ocera code base is open source and is available under the terms of the GPL. For further information visit ocera.org.

Technologic Systems provides a "Getting Started Guide" and a tarball with the entire OCERA/LINCAN compiled for both ARM and X86 architectures. Please check the download section of TS-CAN1.

Detailed Feature List

  • Philips SJA1000 CAN controller
  • Opto-isolated CAN interface
  • Also available without opto-isolation
  • Up to 1Mbps bit rate
  • Jumper selectable termination resistor
  • Jumper selectable IRQ and I/O decode
  • PC/104 compatible with x86 and ARM
  • Extended Temp Range (-40° to +85°C)
  • Linux Drivers included
  • Supports CanOPEN protocol
  • Manual and software examples available

Technologic Systems provides complete documentation for our mature products, including manuals, schematics, mechanical drawings, etc. The most recent documentation files are always made available through our website. If you don't find the documentation you are looking for, contact support for more information. Also, please make sure to visit our Embedded Systems Support webpage, our official documentation, and join our official Developers Forum.

Documentation
Software Download
Third Party Documentation
From the Blog:
Product Notices:
Subscribe to the Product Communication System (TS-PCS) for TS-CAN1 Notices
Physical
Fanless Temperature Range -40 ° to 85 °C
Quantities
Product Configurations 1 50
TS-CAN1 $75 $66
Product Configuration
Part Description Price
TS-CAN1 SJA1000 CAN 2.0B Bus Interface - PC/104 peripheral board Pricing

CA Prop 65 Warning WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov