16525 East Laser Drive
Fountain Hills, AZ 85268
Phone (480) 837-5200
Technologic Systems' Logo
TS-ENC200 - Rugged Metal Enclosure Shown with options - See larger images
Technologic Systems' Logo Technologic Systems

TS-ENC200

Rugged Metal Enclosure

Starting at $150 (Qty. 1)

Highlights

  • Supports TS-5300, TS-3300
  • Power converter: 20-30V DC to 5V DC
  • 2 additional COM ports provided
  • COM3 opto-isolated, 485 optional
  • Optional modem and speaker

This rugged metal enclosure is made to house Technologic Systems Single Board Computers in the most hostiles environments, protecting the internal electronics and increasing the general system reliability. In addition, it makes board utilization easier by bringing out a regulated power supply and computer's I/O interfaces through standard connectors.

Hardware

The TS-ENC200 metal enclosure is designed to house the TS--3300 or TS-5300 Single Board Computer. The switching power regulator converts 20-30 VDC input power to regulated +5 VDC required by the SBC. The TS-ENC200 also provides an IDE interface with a 40 pin interface and a 50 pin laptop drive interface. Two additional COM ports are provided with various options including Modem, RS485, RS422 and opto-isolation. Both the IDE interface and the COM ports are jumper configurable

Additional features include:

  • 2 COM ports (in addition to the two provided by the SBC, a total of four or more)
    • COM1: from the base SBC is RS-232 or optional RS-422 or RS485
    • COM2: from the base SBC is RS-232
    • COM3: 16550 on TS-ENC200 board is opto-isolated RS-232 with optional RS485 or RS422
    • COM4: 16550 on TS-ENC200 board is RS232 COM port with optional modem
  • Switching power supply provides +5 VDC to SBC from an external 20-30 VDC power source
  • Transient suppression circuitry protects power supply input
  • 2.5" IDE interface connector and mounting holes for laptop sized harddrives (50 pin 2mm connector)
  • 3.5" IDE interface connector for regular sized harddrives (40 pin .1" connector, standard IDE)
  • Configurable front push button that can be the power switch or user readable in software
  • Compact Flash slot for easy access.
  • COM ports and IDE interface have jumper selectable IRQ's
  • Optional modem supports standard AT commands and has FCC compliant line interface
  • Bi-color status LED on front panel is user programmable
  • Mounting holes for panel mount

For further information on this product, please contact Technologic Systems or refer to the manual.

Software

Software information not available for this product. For further information on this product, please contact Technologic Systems or refer to the manual.

Detailed Feature List

  • Supports TS-5300, TS-3300
  • Power converter: 20-30V DC to 5V DC
  • 2 additional COM ports provided
  • COM3 opto-isolated, 485 optional
  • Optional modem and speaker
  • Jumper selectable IDE
  • Bi-color status LED on front panel
  • User configurable push button
  • COM ports adapted to RJ-45
  • Modem port is standard RJ-11
  • Sturdy metal design reduces noise
  • Surge suppression on power input
  • Power good LED visible
  • Dimensions 2-3/8x5-3/8x6 inches
  • Ethernet Status LEDs visible

Technologic Systems provides complete documentation for our mature products, including manuals, schematics, mechanical drawings, etc. The most recent documentation files are always made available through our website. If you don't find the documentation you are looking for, contact support for more information. Also, please make sure to visit our Embedded Systems Support webpage, our official WIKI and join our official Developers Forum.

Documentation

Articles

News Item

In the News

Product Notices

No notices exist.

For TS-ENC200 updates and notices Subscribe to the Product Communication System (TS-PCS)

The prices below are available for sales orders requesting different quantities on a per release basis.

Quantity
Product Configuration 1
10 25 50 100 250+
TS-ENC200 $150 $150 $150 $150 $150 Call us

Product Customization

Technologic Systems can provide you with a custom tailored version of our standard product starting at minimum order sizes of 100 units or more. Customized products can be based on various combinations of many of the standard product features. There will be a one-time customization fee to cover the set up of your custom part number and production processes. Once the set up is complete the standard lead time for your customized product would be 6-8 weeks. Please contact us to get started on tailoring this product to meet your needs. In addition to tailoring our standard product to your needs, for slightly larger orders sizes, Technologic Systems can also provide a custom design based on this product to meet your mechanical requirements or to add features.

What's Included

Use the table below to configure your product and add it to your cart. If you have any questions, please contact us for assistance.

Product Configuration
Part # Description Price Qty Total
TS-ENC200 Metal Enclosure with power converter included $150 $150
On-board Options
Part # Description Price Qty Total
OP-485-FD-14 Full Duplex RS-485 $14 $0
OP-485-H RS-485 Half duplex on COM3 $0 $0
OP-MSPKR Optional speaker for call progress monitoring $10 $0
OP-ISO-ENC200 Isolated internal power supply $80 $0
OP-MODEM33K V.34 33.6 Kbaud Modem on COM4 $100 $0
OP-MODEM56K V.34 56 Kbaud Modem on COM4 $110 $0
OP-IDEHD 2.5 Laptop sized hard-drive $150 $0
Power Supplies
Part # Description Price Qty Total
PS-12VDC-REG-LG International regulated 12VDC wall mounted power supply (Legacy part) $22 $0

Contact us!

Search the KB