| 16525 East Laser Drive
Fountain Hills, AZ 85268
Phone (480) 837-5200
The TS-7390 is a compact full-featured Single Board Computer (SBC) based upon the Cirrus EP9302 200MHz ARM9 CPU, which provides a standard set of on-board peripherals. This product features an on-board FPGA with a dedicated 8MB RAM Framebuffer and a 800x480 video core integrated with a 7-inch Color TFT-LCD panel with TouchScreen Interface, as shown by the TS-TPC-7390 product pictures. The TS-7390 boots Linux2.6 out-of-the-box from on-board NAND flash or an SD Card and the included Debian Linux distribution provides driver and software library support for embedded video/touchscreen applications.
The TS-TPC-7390 is a low-cost, industrial-grade WVGA touchscreen computer with audio codec, speaker, and silver bezel. Utilizing a low-power EP9302 ARM9 CPU, it requires no fans or heat-sinks. Reliability is enhanced through entirely solid-state operation with no moving parts. The rugged aluminum support elegantly frames the 7-inch TFT LCD, making it an ideal solution for mounting on a wall or cabinet. The computer unit is mounted to the back of the panel, providing access to a wide variety of connectors including 2 10/100BASE-T Ethernet ports, 2 full-speed USB ports, DIO, and serial ports. The unit runs Debian Linux 2.6 and Debian Sarge out of the box and is suitable for a wide range of HMI-type and simple GUI applications.
The TS-7390 single board computer powers the TS-TPC-7390 Touch Panel Computer. The TS-7390 features a multi-purpose 200MHz ARM9 CPU. It allows for development of multi-function embedded applications through its multiple peripheral interfaces, which include on-board RAM, NAND flash, dual 10/100 Ethernet ports, dual USB 2.0 hosts, serial ports, SD card socket, A/D channels, digital I/O lines, temperature sensor, real time clock, audio codec and speaker, video framebuffer, touchscreen, and LCD video interfaces.
The 40-pin header provides the following features:
The default load for the 5K LUT LatticeXP2 FPGA provides additional peripherals, such as SD card socket, extra serial ports, and a 800x480 Color TFT-LCD video core. In addition, the FPGA provides an 8-bit multiplexed expansion bus for inclusion of application-specific daughter cards, with the connector pins connected straight to the FPGA.
The TS-7390 engine is extremely rugged and reliable. Temperature operation is fanless and range is industrial standard at lower CPU speeds. The LCD is rated for storage temperature range of -30 to +80 degrees Celsius. The operating range is -20 to +70 degrees Celsius. Power input range is flexible from 5V DC to 28V DC. The power supplies for both the LCD and the LCD back-light are controlled via software.
The TS-7390 provides multiple COM ports using both TTL (2 total) and RS-232 levels (4 total). Two optional RS-485 ports are also available with DMX/RDM support. The EP9302 processor provides two COM ports (TTL Console at the JTAG header and RS-232 at COM1 header). The remaining COM ports are provided by the FPGA through the proprietary TS-UART core and are 9-bit serial capable.
The TS-7390 is designed specifically as the engine for the TS-TPC-7390. The connectors are not general purpose and will not work with most LCDs, so we do not generally sell the TS-7390 as a stand alone board. If you have an interest in using the TS-7390 in your project, please call us for information about pricing or product customization. Also, for customers looking for a custom SBC solution for their LCD+TouchScreen interfaces of choice, we recommend customization of the TS-7350/TS-7370 LCD-Ready FPGA computers. Contact Technologic Systems should you need more information about custom LCD FPGA designs or assistance with LCD integration.
The TS-7390 SBC engine boots to Linux 2.6 from an SD Card using the proprietary TS-SDBOOT bootup firmware residing in FPGA ROM memory in about one second, depending on the SD Card speed and brand. The board can also boot from on-board NAND flash using the TS-NANDBOOT firmware in about the same time. The state of jumper 1 (JP1) controls whether the board boot from NAND or SD.
A valid bootable media (SD Card or NAND flash) must contain a Linux Kernel image, a initial ram disk image and a valid Linux root filesystem. The ultra-fast Linux bootup solution was optimized for speed and includes kernel, initrd and filesystem (Busybox) tweaks. Since this board boots to an initrd (initial ram disk) with a read-only mounted filesystem, it is possible to have something other than a shell prompt running after bootup by editing the /linuxrc shell script on the initrd. Additional TS-7390 software features include:
The TS-7390 bootstrap combines FPGA hardware logic, specific boot-up firmware and Kernel tweaks to ensure fast boot time, security, and high board recoverability:
Technologic Systems TS-7390 ARM Single Board Computer (SBC) are compatible with a wide range of Operating Systems (OS's). The Linux choice is highly recommended and our products are totally integrated with the open-source vision. The boards ships with Linux 2.6 Kernel running out-of-the-box. They are the first Technologic Systems EP9302 ARM9 computers which use 2.6 Kernel by default. Linux Kernel includes complete driver support for on-board hardware, enabling quick time to market of end-users applications. Examples and source codes are also available for downloading.
The TS-7390 SBCs are configured to load the Debian Linux OS from either the on-board flash or a SD Card during boot up time. The full featured Debian Linux (version Etch) distribution includes a complete GNU C/C++ embedded development environment installed. In addition, Apache Web Server, FTP, SSH, Telnet and other network services are available with C/PHP for embedded CGI development. Custom Linux GUI applications can be developed using X Windows (Xorg-Xserver included) or QtEmbedded libraries (available for download).
The Eclipse IDE configured for embedded development with the TS-7000 ARM9 computers running Debian Linux is provided along with the 2GB development SD Card. Technologic Systems makes use of the Eclipse Europa release and the DSDP+CDT plugins in order to provide an advanced IDE and makes embedded development easier. ARM crosstool chains, cygwin runtime-libraries and a Java Development Kit are installed on the card, therefore Eclipse IDE will run out-of-the-box (no need for installation) on your Windows PC. The Eclipse environment is already configured to allow a quick startup with a TS-7000 embedded development. After start-up, the installed 'helloworld' example shows the user how to use the Eclipse functionalities, including cross-compilation, build-management configurations, binary download to the TS-7000 target, target management via SSH, FTP, telnet or serial console, client-server debugging with Eclipse debug view, etc.
Please contact Technologic Systems for further information regarding Operating System and software support for this product.
|CPU Part Number||EP9302|
|CPU Speed||200 MHz|
|RAM||64 MB to 128 MB|
|Flash Storage||512 MB|
|NAND Flash Storage||512 MB|
|full-size SD Socket||1x|
|Data Acquisition & Control|
|Screen Diagonal Size||7''|
|Width x Height Screen Resolution||800x480 px|
|Programmable FPGA||5k LUT|
|Battery-Backed Real Time Clock||1x|
|Fanless Temp Range||-20 °C to 70 °C|
|Max Power Consumption||2.00 W|
|Operating Supply Voltage|
|Operating Supply Voltage||5 VDC to 28 VDC|
|Debian Linux Distribution||Yes|
|Busybox Small Distribution||Yes|
Technologic Systems provides complete documentation for our mature products, including manuals, schematics, mechanical drawings, etc. The most recent documentation files are always made available through our website. If you don't find the documentation you are looking for, contact support for more information. Also, please make sure to visit our Embedded Systems Support webpage, our official WIKI and join our official Developers Forum.
No notices exist.
For TS-TPC-7390 updates and notices Subscribe to the Product Communication System (TS-PCS)
Products based on the same CPU and software platform
Use the form below to contact us about the TS-TPC-7390, and we will respond within one business day. For faster service, please call us at (480) 837-5200, Mo-Fr, 8am to 5pm (MST). Thank you.
The prices below are available for sales orders requesting different quantities on a per release basis.
Use the table below to configure your product and add it to your cart. If you have any questions, please contact us for assistance.