16525 East Laser Drive
Fountain Hills, AZ 85268
Phone (480) 837-5200
Technologic Systems' Logo
TS-WIFIBOX - WiFi-Enabled Computer Box Shown with options - See larger images
Technologic Systems' Logo Technologic Systems


WiFi-Enabled Computer Box

Starting at $219 (Qty. 100)


  • Powered by TS-7400 SoM
  • 200MHz ARM9 CPU
  • Internal WiFi w/ external antenna
  • 32MB SDRAM (128MB opt)
  • 32MB NAND Flash

The TS-WIFIBOX Application Kit includes a complete solution for 802.11g WiFi applications. The one-piece setup includes a TS-7400 200Mhz ARM9 SoM engine, a Hammond aluminum enclosure, two aluminum end-plates and an internal 802.11g WiFi card integrated with external antenna. In addition, Linux drivers and software packages are installed to provide an out-of-the-box WiFi solution.


The TS-WIFIBOX product is a small embedded computer box with extra accessories and pre-configured software packages. It is designed to provide extreme performance for applications which demand high reliability, fast bootup/startup, and Wi-Fi connectivity at low cost and low power, such as a gateway or firewall, protocol converter, ethernet to WiFi bridge, web server, WiFi audio, etc.

The TS-WIFIBOX is an industrial grade solution, designed to endure extreme environmental stressors and run reliably for years. Inside, all the components are soldered on, the SD Card is clamped into the socket, and there are no moving parts. The industrial power connector has screw down terminals for a connection that will not loosen even under extreme vibration. The Hammond extruded aluminum enclosure is the perfect rugged enclosure. The TS-WIFIBOX uses less than 4 Watts of power and can be programmed for even lower use. Compare that to a PC and monitor at 175 Watts.

TS-WIFIBOX measures 1.1 x 4.9 x 3.1inches. The two end-plates bring out 1 10/100 ethernet port, 1 USB port, 2 user controlled red and green LEDs, power input and WiFi external antenna jack. The power source is either 8-30V DC through the industrial-grade two position terminal strip on the rear of the unit, or regulated 5V DC through the commercial-grade barrel connector on the front of the unit. The integrated 802.11g Wi-Fi daughter-card with external antenna connector (SMA connector) makes use of one USB channel and provides reliable high-speed wireless connectivity. There is one SD Card socket available inside, which provides reliable and high capacity storage, currently up to 4GB.

The quantity 1 pricing for the TS-WIFIBOX Application Kit, as shown in the picture with an internal TS-7400-32-32F, is $249. Quantity discount starts at 10 units. Contact Technologic Systems for ordering and further information.

Industrial quality design

  • Rugged aluminum enclosure
  • No moving parts
  • Industrial power connector will not loosen
  • Low power, low heat, long life
  • All components soldered-on
  • SD Card clamped in socket


The TS-WIFIBOX comes with a TS-7400 engine, which boots to Linux from NAND flash using the proprietary TS-FLASHBOOT bootup firmware residing in ROM memory. It can also boot from an SD Card, through the TS-SDBOOT firmware. The TS-7400 Ultra-Fast bootup solution was optimized for speed and includes kernel, initrd and filesystem (Busybox) tweaks. The bootstrap setup is very similar to the 1.69s Fast Bootup for TS-7300, but almost 30% faster. In addition, the hardware accelerated NAND flash controller is an unique feature implemented in the on-board CPLD that provides hardware ECC, allowing the system to skip software ECC during startup and enabling bootup to a Linux shell prompt in 1.1 seconds (when console is available through a COM port). Since the TS-7400 actually boots to an initrd with a read-only mounted filesystem, it is possible to have something other than a shell prompt running after bootup by editing the /linuxrc shell script on the initrd.

The TS-WIFIBOX already includes all the necessary Linux drivers and packages in order to enable out-of-the-box WiFi application productivity. A TS-WIFIBOX Linux application would load in about 1.1 seconds plus the time required to load additional driver modules, application packages and binaries. Contact Technologic Systems for further information on the TS-WIFIBOX software solution or visit the software section of the TS-7400 page.

Detailed Feature List

  • Powered by TS-7400 SoM
  • 200MHz ARM9 CPU
  • Internal WiFi w/ external antenna
  • 32MB SDRAM (128MB opt)
  • 32MB NAND Flash
  • 1 10/100 Ethernet
  • 1 USB 2.0 (12 Mbit/s max)
  • Up to 4GB Flash via SD Card
  • Ultra-Fast Bootup Firmware
  • WiFi drivers and tools for Linux
  • Optional On-Board Temp Sensor
  • Optional Battery-Backed RTC
  • Industrial quality design

Technologic Systems provides complete documentation for our mature products, including manuals, schematics, mechanical drawings, etc. The most recent documentation files are always made available through our website. If you don't find the documentation you are looking for, contact support for more information. Also, please make sure to visit our Embedded Systems Support webpage, our official WIKI and join our official Developers Forum.




News Item

In the News

Product Notices

No notices exist.

For TS-WIFIBOX updates and notices Subscribe to the Product Communication System (TS-PCS)

The prices below are available for sales orders requesting different quantities on a per release basis.

Product Configuration 1
10 25 50 100 250+

Product Customization

Technologic Systems can provide you with a custom tailored version of our standard product starting at minimum order sizes of 100 units or more. Customized products can be based on various combinations of many of the standard product features. There will be a one-time customization fee to cover the set up of your custom part number and production processes. Once the set up is complete the standard lead time for your customized product would be 6-8 weeks. Please contact us to get started on tailoring this product to meet your needs. In addition to tailoring our standard product to your needs, for slightly larger orders sizes, Technologic Systems can also provide a custom design based on this product to meet your mechanical requirements or to add features.

What's Included

Use the table below to configure your product and add it to your cart. If you have any questions, please contact us for assistance.

On-board Options
Part # Description Price Qty Total
OP-64MBRAM upgrade to 64MB RAM $16 $0
OP-128MBRAM upgrade to 128MB RAM $100 $0
OP-TMPSENSE On-Board Temperature Sensor $3 $0
OP-PS30V 8-30VDC switching power input through screw terminal $20 $0
OP-BBRTC Battery Backed Real Time Clock More info $24 $0
Flash Media
Part # Description Price Qty Total
SD-8GB-7300 TS-7300 bootable 8GB SD card pre-installed with Debian Linux for ARM and full tool chain (supports TS-7260, TS-7300, TS-7400) $28 $0
Power Supplies
Part # Description Price Qty Total
PS-5VDC-REG-1AMP-BC International regulated 5VDC 1AMP wall mounted power supply with barrel connector $12 $0
PS-12VDC-REG-2P2 International regulated 12VDC wall mounted power supply with 2 pin black connector, type 2 (compatible only with OP-PS30V) $22 $0

Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Contact us!

Search the KB